OK so I got new decals for my Seven and no instructions cam with the decals. Taking off the old ones is no problem - my question is how to apply the new ones.

Anyone have instrucions or tips/tricks?

Seven will email you instructions. But it is very simple. Just clean the surface where you want to affix the new decals. Line up the decal with the paper backing facing you and place the sticker side down on the bike frame. The decal will immediately transfer to the metal. Rub the paper backing with a credit card across the whole part of where the decal is on the other side, before you move the paper backing away, to be sure the decal is completely contacting the metal.

Seven will email you instructions. But it is very simple. Just clean the surface where you want to affix the new decals. Line up the decal with the paper backing facing you and place the sticker side down on the bike frame. The decal will immediately transfer to the metal. Rub the paper backing with a credit card across the whole part of where the decal is on the other side, before you move the paper backing away, to be sure the decal is completely contacting the metal.
If its the same as other transfer decals, the paper backing will come off to reveal a clear carrier so you can better eyeball the position of the decal. You can then rub the clear liner to transfer the decal.

yeah just make sure you rub like hell to be sure every bit of the decal adheres to the frame. it is worth warming the metal too because the decal will transfer more easily. i use a bic pen instead of a credit card and rub until the clear transfer sheet falls away from the decal.