I have a Lemond Tete d'Course full ti. I know the bike is a 61 with a top tube of 60.5. Where can I find out the rest of the bikes dimensions?
Thanks

Lemond's website has an archive of older catalog pages. I don't think the dimentions are any different from the newer sloping geometries (with the exception of 15mm taller head tubes in 05') but you should be able to find your frame's measurements there. www.lemondbikes.com

Tried the link before but all I ciuld find were current models. It seems to me that the dimensions would be different from an older TI bike to a new carbon.

No geometry, but here are scans of the 2001 and 2002 Tete de Course spec sheets. I'll keep looking.

http://bikearchive.com/action.php?action=model&brand=LEMOND&model=Tete+de+Course

I looked around and found a PDF on 01 and 02 frames but it did not list geo. I would think it would be similar to their classic steel in a level top tube. Worst case, grab the measuring tape and see for yourself. The pic is the points they measure and the link will take you to the Classic Steel, yours might be very close.
http://www.lemondbikes.com/bikes/road_racing/classic_steel/sarthe.php?tab=2

Paper page 95 (.pdf file page 96) of this shop booklet.

http://www.fisherbikes.com/inc/pdf/gf_tech_manual_03.pdf

Thanks for all the great responses. I have not had time to look at all of this yet but I wanted to give a shout out to all of you.
Mike