I changed out the cables on my bike and shifting is not quite the same now. I can't get the small cog to engage whether I am using the 50 or 34 chainring. To install the cable, I had the largest chainring and smallest cog engaged and pulled the cable until taut and tightened the cable in place.
Also, when I shift to the large cog in the back, there is some rubbing between the chain and the spokes. I have adjusted cable tension and the cable seems loose enough when try to shift from the 13 to the 12 cog but still it won't move over to the 12. If I adjust more to loosen the cable, it won't shift the smaller to larger cogs.
I don't want to mess with the limit screws - it worked before the cables were changed so that isn't the solution. Any ideas as to what is wrong?
Thanks in advance!
Also, when I shift to the large cog in the back, there is some rubbing between the chain and the spokes. I have adjusted cable tension and the cable seems loose enough when try to shift from the 13 to the 12 cog but still it won't move over to the 12. If I adjust more to loosen the cable, it won't shift the smaller to larger cogs.
I don't want to mess with the limit screws - it worked before the cables were changed so that isn't the solution. Any ideas as to what is wrong?
Thanks in advance!