Results 1 to 2 of 2
  1. #1
    RoadBikeReview Member
    Reputation:
    Join Date
    May 2017
    Posts
    7

    Servicing Shimano DA C50 wheels with FH-9000 hubs

    My DA C50 WH-9000 wheels are running a little rough and the rear is rattling so I suspect they're overdue for a service. I've started with the front wheel and got the axle out but was expecting to be able to remove the bearings with a magnet, however it appears these hubs use a ball retainer and the only way to remove it is by taking out the seal ring.

    Is this going to be an issue in terms of them being water tight? Any tips for the safe removal and replacement of the seal?
    Last edited by Benson1970; 06-12-2017 at 01:10 PM.

  2. #2
    'brifter' is a lame word.
    Reputation: cxwrench's Avatar
    Join Date
    Nov 2004
    Posts
    11,955
    The only thing that comes to mind is: 'Be careful'.

    Or...have spares on hand just in case. They do tend to bend fairly easily.
    I work for some bike racers
    I've got some bikes, some guns,
    and a bunch of skateboards

Similar Threads

  1. Shimano Dura-Ace WH-9000-C50-CL Wheelset
    By CashMoney in forum Wheels and Tires
    Replies: 4
    Last Post: 06-20-2016, 03:49 PM
  2. Novatec/Bitex hubs vs. BHS-style hubs: bearing servicing
    By BelgianHammer in forum Components, Wrenching
    Replies: 14
    Last Post: 05-24-2015, 08:29 AM
  3. Dura Ace WH-9000-C24-TU vs WH-9000-C24-TL
    By Philhumphrey in forum Wheels and Tires
    Replies: 31
    Last Post: 02-22-2014, 12:50 PM
  4. Servicing Shimano 600 hubs
    By oldskoolboarder in forum Components, Wrenching
    Replies: 6
    Last Post: 08-23-2004, 07:50 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •