Is there a headset to adapt a 1 1/8" fork to a 1" headset

[Bantamben]

Just got a colnago master without a fork. It looks like I can fit a 1 1/8 " fork in the headtube if there was a special 1 1/8 " conversion headset. Does this headset exist and if not are there any other options than using a 1" fork which there are very little of it seems

[DaveT]

....no.....

[natedg200202]

I would work on getting a 1" fork to match.

[bigbill]

You can get a Wound Up fork in 1".

[velodog]

Pick one

colnago steel fork in Bicycle Parts | eBay

[Bantamben]

Yeah hard to find a steel fork the right length as my frames a 59 most used forks are for smaller bikes. I kinda new it was a long shot but thought there was a headset with really thin bearings to adapt. Best bet I guess is to buy a new 1" fork.

[velodog]

Yeah hard to find a steel fork the right length as my frames a 59 most used forks are for smaller bikes. I kinda new it was a long shot but thought there was a headset with really thin bearings to adapt. Best bet I guess is to buy a new 1" fork.

Have you looked at the link to the forks on e-bay I posted?

Threadless 300mm
New Old Stock Colnago Precisa Straight Blade Steel Fork 1" Threadless Model | eBay

Threaded 200mm
Colnago Steel Fork 1"Taditionell Curved 200 mm Colnago Stahl Gabel 1" Gebogen | eBay

My DeRosa is a 58 and a quick measure from top of fork crown to top of headset is right at 200mm. Thats a threaded steerer and headset.
Measure your head tube and add the stack height of the headset your going to use and see if 200mm will work.

If the steerer is a little short the Chris King GripNut headset is made to compensate a few mm's.

Chris King GripNut