Results 1 to 4 of 4
  1. #1
    RoadBikeReview Member
    Reputation:
    Join Date
    Jan 2006
    Posts
    8

    Easton EC90X Fork

    I have a 2010 Fuji CrossPro RC. It has a 1 1/8" Fork/HS that tapers into a bigger diameter on the bottom of the headtube.... Can I install a normal 1 1/8" Easton EC90X Fork on this frame???

  2. #2
    RoadBikeReview Member
    Reputation:
    Join Date
    Jul 2010
    Posts
    26
    do you have this CX geometry?

  3. #3
    RoadBikeReview Member
    Reputation:
    Join Date
    Jan 2003
    Posts
    105
    If you have a headtube that tapers from a 1 1/8" to 1 1/2", I would get the correct fork, not a straight 1 1/8". I believe Ritchey makes one, and know that ENVE makes one too. I would get the ENVE which is on sale on their site. But this assumes you have a headtube as above. I don't know Fuji's.

  4. #4
    RoadBikeReview Member
    Reputation: krisdrum's Avatar
    Join Date
    Oct 2007
    Posts
    3,258
    I don't think you can use a straight steerer tube fork on a bike with a tapered tube. Chris King might make a conversion kit, but I am assuming your Fuji does not have press-in headset cups, but an integrated headset.

    You don't want the Easton anyway, pretty flexy and is known to shudder under hard braking unless your brakes are set-up just right.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

EUROBIKE

Hot Deals

Latest RoadBike Articles


Latest Videos

RoadbikeReview on Facebook