Results 1 to 3 of 3
  1. #1
    RoadBikeReview Member
    Join Date
    Jan 2008

    Anyone using American Classic tubeless valve on other wheels?

    I have a couple sets of Campy 2-way fit wheels (Zonda and Shamal Ultra) on my bikes and I feel like the tubeless valves are going to need replacing eventually. One is already a little bent from some sort of impact, and another feels like the threads are going to strip after a couple more cycles of removing and installing the core.

    The AMClassic valves look like nice, are available in a couple lengths and are moderately priced. Anyone using these on Campy or Fulcrum 2-way fit wheels? I can't think of any reason they wouldn't work and if I don't get any response here I will give it a try and post back.
    miles to posts ratio is > 30:1

  2. #2
    pmt is offline
    RoadBikeReview Member
    Join Date
    Aug 2009
    Sure, they're nothing special. They should work fine on whatever wheels you have; I used them on Neuvations.

  3. #3
    RoadBikeReview Member
    Join Date
    Jun 2005
    I have AM classic valves on my velocity a23s. Works fine. I did break one in half by over tightening the nut but that was my fault

Similar Threads

  1. American Classic Tubeless Reports?
    By sevenbravo in forum Wheels and Tires
    Replies: 7
    Last Post: 10-15-2012, 07:20 PM
  2. American Classic Wheels
    By Ziptie in forum Wheels and Tires
    Replies: 0
    Last Post: 11-15-2007, 10:44 AM
  3. Truing American Classic Wheels?
    By oliverpete in forum Components, Wrenching
    Replies: 7
    Last Post: 06-18-2005, 07:07 PM
  4. American Classic Wheels?
    By Bluebatmobile in forum Wheels and Tires
    Replies: 8
    Last Post: 02-19-2005, 02:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts



VISIT US AT and the ConsumerReview Network are business units of Invenda Corporation

(C) Copyright 1996-2018. All Rights Reserved.