• 06-19-2020
    curtw
    Need to replace my Jamis CF frame
    OK, so I was hit by a car, pretty much snapped the frame in half. Jamis has what *seems* to be a pretty good deal 25% off crash replacement frame. But they're not selling any carbon fiber bikes any more!

    Any recommendations on a decent carbon fiber frame that will accept 10-speed Ultegra Di2 (6770)?
  • 06-19-2020
    velodog
    The nicest one the guys insurance company will pay for.
  • 06-19-2020
    cxwrench
    Any non-disc road frame made in the last 30 or so years. Literally. Any. Or if you want to stick w/ carbon pretty much any non-disc frame from the last 10 or so years.
  • 06-20-2020
    tlg
    Quote:

    Originally Posted by curtw View Post
    OK, so I was hit by a car, pretty much snapped the frame in half. Jamis has what *seems* to be a pretty good deal 25% off crash replacement frame.
    Any recommendations on a decent carbon fiber frame that will accept 10-speed Ultegra Di2 (6770)?

    Bummer. Sorry to hear that. Is the driver/insurance paying for it?

    Is it just the frame? Is the groupset ok? Reason I ask, 6770 is obsolete and really hard to find parts. Especially rear derailleurs. If you find one, you'll pay a premium price. Used ones are selling for several hundred on eBay.
    My wife was hit the other year (on her Jamis Xenith Pro) luckily the frame was fine. But some of the 6770 parts were damaged. It was so expensive to replace them, I was able to take the money and buy a whole new 11sp drivetrain.


    Quote:

    But they're not selling any carbon fiber bikes any more!
    Dang that sucks.
  • 06-20-2020
    Peter P.
    Quote:

    Originally Posted by velodog View Post
    The nicest one the guys insurance company will pay for.

    I always advocate against this strategy. Spending windfall money on something you normally couldn't afford usually results in something that's too expensive to maintain unless you keep getting hit by cars and get decent settlements. :D

    Better to stick within your budget and replace the Jamis with something in a similar class. Sorry; I don't have any suggestions on what to replace it with.
  • 06-20-2020
    curtw
    Accident was completely my fault, so I'l be paying for bike replacement out of pocket. I got distracted by a driver wanting to talk about the weather through his open window, rode right into an intersection against the red light and got T-Boned.

    I think the bike took the entire impact with the car. No pain until I hit the pavement two lanes over.
  • 06-20-2020
    curtw
    Quote:

    Originally Posted by tlg View Post
    Bummer. Sorry to hear that. Is the driver/insurance paying for it?

    Is it just the frame? Is the groupset ok? Reason I ask, 6770 is obsolete and really hard to find parts. Especially rear derailleurs. If you find one, you'll pay a premium price. Used ones are selling for several hundred on eBay.
    My wife was hit the other year (on her Jamis Xenith Pro) luckily the frame was fine. But some of the 6770 parts were damaged. It was so expensive to replace them, I was able to take the money and buy a whole new 11sp drivetrain.

    Dang that sucks.

    Most of the groupset looks fine. I literally *just* replaced the front derailleur, so I've seen the prices of 6770. The wires came unplugged, but none are broken.
    the left crank is bent, but I'm guessing that pretty much any Ultegra crankset since 2010 should work.
  • 06-20-2020
    velodog
    Quote:

    Originally Posted by curtw View Post
    Accident was completely my fault, so I'l be paying for bike replacement out of pocket. I got distracted by a driver wanting to talk about the weather through his open window, rode right into an intersection against the red light and got T-Boned.

    I think the bike took the entire impact with the car. No pain until I hit the pavement two lanes over.

    Dude, I feel your pain. Not on a bike but I was backing into the driveway and the neighbor greeted me and I kept backing up after he got my attention, right into the garage door. It wasn't pretty.

    Lets us k\leave the distracted movements t others.
  • 06-20-2020
    tlg
    Quote:

    Originally Posted by curtw View Post
    the left crank is bent, but I'm guessing that pretty much any Ultegra crankset since 2010 should work.

    Yea any crank will fine.
    All the wires are compatible.
  • 07-31-2020
    Jwiffle
    Although Jamis isn't doing any carbon road bikes, anymore (though they do have the carbon gravel bike), did you ask about any stock left over in their warranty department? Sometimes, as they go a few years, they'll be willing to sell frames out of their warranty stock. I'd double-check, you might get lucky.
  • 08-01-2020
    curtw
    Quote:

    Originally Posted by Jwiffle View Post
    Although Jamis isn't doing any carbon road bikes, anymore (though they do have the carbon gravel bike), did you ask about any stock left over in their warranty department? Sometimes, as they go a few years, they'll be willing to sell frames out of their warranty stock. I'd double-check, you might get lucky.

    I had to go through a dealer to take advantage of the policy. They found me a frame in the same size I had, probably a year newer, but they haven't told me the price yet.

    On-line, I can get a CF frame from framedbikes.com, in the perfect geometry, for $345, so that's my yardstick.
  • 10-17-2020
    curtw
    Following up. Yeah the "crash replacement" frame from Jamis would have been $1,600, with no discount on the rebuild.

    So, I ordered the $345 "Liege" from Framed. Will have it built up when I put my hands on some cranks and pedals (did not originally realize that one pedal was trashed). Not sure if my BB or headset bearings will transfer, ready to pay for new ones there too.
  • 10-19-2020
    Lombard
    Multitasking is bad, mmmmkay? Best to ignore people wanting to make conversion while in/on any vehicle. Social distancing during the pandemic makes this even easier.