SRAM S950 help needed...
Results 1 to 1 of 1
  1. #1
    RoadBikeReview Member
    Join Date
    Aug 2017

    SRAM S950 help needed...

    First time poster here. I recently got a hold of a 2012 Cervelo R5 VWD frame. I've always bought my bikes pre-built and have replaced parts here and there but have never done a full build from scratch. Anyway, through some research, I think I need a ~13mm spacer on the drive side and need to take out the preload adjuster and 5mm spacer on the non-drive side and replace them with a couple of washers/shims (~.5mm). Please correct me if I'm wrong. I don't have the 13mm spacer and shims yet but the bigger issue I have right now is I tried putting the spindle in and it won't seem to fit in there. Any ideas? Thanks!
    Last edited by GotM; 08-16-2017 at 08:07 PM.

Similar Threads

  1. Replies: 13
    Last Post: 02-10-2017, 03:42 PM
  2. Crankset advice-SRAM s950 Question
    By BoilerMike in forum Components, Wrenching
    Replies: 7
    Last Post: 02-23-2015, 06:24 AM
  3. SRAM S950 BB30 Crankset
    By Sundog in forum Components, Wrenching
    Replies: 4
    Last Post: 10-26-2014, 12:53 PM
  4. SRAM S950 carbon compact cranks
    By farva in forum Components, Wrenching
    Replies: 5
    Last Post: 11-11-2012, 04:24 PM
  5. Sram S900 / S950 + Q Rings
    By mickiii in forum SRAM
    Replies: 2
    Last Post: 09-08-2011, 10:16 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts




© Copyright 2020 VerticalScope Inc. All rights reserved.