Di2 Cable Clips?
Results 1 to 13 of 13
  1. #1
    coaster
    Reputation: Lelandjt's Avatar
    Join Date
    Sep 2008
    Posts
    1,051

    Di2 Cable Clips?

    I'm looking for little clips that would attach the Di2 cable to the brake housing for the run from the bar to the frame. Anyone seen one?

  2. #2
    'brifter' is a lame word.
    Reputation: cxwrench's Avatar
    Join Date
    Nov 2004
    Posts
    14,292
    I work for some bike racers
    I've got some bikes, some guns,
    and a bunch of skateboards

  3. #3
    coaster
    Reputation: Lelandjt's Avatar
    Join Date
    Sep 2008
    Posts
    1,051
    Those rubber tubes would work and be clean looking if it was more permanent but this is for bikes with couplers. When taken apart the brake housing stays attached to the handlebar while the Di2 wire stays attached to the frame so it would have to be a clip that can come on and off. Right now we use two velcro wraps.
    Last edited by Lelandjt; 01-05-2016 at 03:50 PM.

  4. #4
    'brifter' is a lame word.
    Reputation: cxwrench's Avatar
    Join Date
    Nov 2004
    Posts
    14,292
    Ah, ok. There must be something similar to the little swivel clips that SRAM/Avid supply w/ brake hoses. You could probably use them if you put a small piece of heat shrink over the Di2 wire to make a little thicker. They snap on and off pretty easily.
    I work for some bike racers
    I've got some bikes, some guns,
    and a bunch of skateboards

  5. #5
    tka
    tka is offline
    RoadBikeReview Member
    Reputation:
    Join Date
    Jun 2014
    Posts
    518
    Sort of like these Jagwire E-shift + brake clips?

  6. #6
    'brifter' is a lame word.
    Reputation: cxwrench's Avatar
    Join Date
    Nov 2004
    Posts
    14,292
    Quote Originally Posted by tka View Post
    Sort of like these Jagwire E-shift + brake clips?
    D'oooohhhh...exactly like that.
    I work for some bike racers
    I've got some bikes, some guns,
    and a bunch of skateboards

  7. #7
    tka
    tka is offline
    RoadBikeReview Member
    Reputation:
    Join Date
    Jun 2014
    Posts
    518
    Quote Originally Posted by cxwrench View Post
    D'oooohhhh...exactly like that.
    I didn't know they made them either until Lelandjt's question and your answer prompted me to look at Jagwire's website. Amazing what you find if you have half an idea what to look for.

  8. #8
    coaster
    Reputation: Lelandjt's Avatar
    Join Date
    Sep 2008
    Posts
    1,051
    Perfect! Thanks guys.

  9. #9
    'brifter' is a lame word.
    Reputation: cxwrench's Avatar
    Join Date
    Nov 2004
    Posts
    14,292
    Great find, I'm ordering some for the shop!
    I work for some bike racers
    I've got some bikes, some guns,
    and a bunch of skateboards

  10. #10
    Re-Cyclist
    Reputation: Special Eyes's Avatar
    Join Date
    Feb 2011
    Posts
    1,563
    The short 3" long black cable ties work very well, are tiny and hold the cable and wire close together. But you need to cut it off each time and replace it.
    Santa Barbara, CA -- My Photo Site -- My Business Site

  11. #11
    RoadBikeReview Member
    Reputation:
    Join Date
    Dec 2014
    Posts
    86
    Sorry to resurrect an old thread but does anyone know where I can still get these? They are on the Jagwire website but I can't seem to find a place to buy them. The ones that come up the most are the swivel ones. Thanks!


    Quote Originally Posted by tka View Post
    Sort of like these Jagwire E-shift + brake clips?

  12. #12
    'brifter' is a lame word.
    Reputation: cxwrench's Avatar
    Join Date
    Nov 2004
    Posts
    14,292
    Quote Originally Posted by runningman10000 View Post
    Sorry to resurrect an old thread but does anyone know where I can still get these? They are on the Jagwire website but I can't seem to find a place to buy them. The ones that come up the most are the swivel ones. Thanks!
    Shimano make a clip that is part # Y71L98010, you can get them on Amazon. They come in packs of 2 https://www.amazon.com/Shimano-Ew-Wu.../dp/B078XRM7ZP
    I work for some bike racers
    I've got some bikes, some guns,
    and a bunch of skateboards

  13. #13
    RoadBikeReview Member
    Reputation:
    Join Date
    Dec 2014
    Posts
    86
    Perfect, thanks CX!

Similar Threads

  1. Replies: 3
    Last Post: 02-04-2014, 03:05 AM
  2. Replies: 3
    Last Post: 12-06-2013, 10:00 AM
  3. $1300 HDMI cable / $6900 AC power cable???
    By Bullvine in forum The Lounge
    Replies: 55
    Last Post: 06-04-2012, 02:23 PM
  4. brake cable clips not scratch frame?
    By Fixed in forum Retro-Classic
    Replies: 14
    Last Post: 11-30-2009, 04:22 PM
  5. Replies: 2
    Last Post: 07-13-2008, 04:59 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

THE SITE

ABOUT ROADBIKEREVIEW

VISIT US AT

© Copyright 2019 VerticalScope Inc. All rights reserved.