Fitting SRAM 22 BB30 - IA crankset
Results 1 to 5 of 5
  1. #1
    RoadBikeReview Member
    Reputation: meezo's Avatar
    Join Date
    Jul 2011
    Posts
    31

    Fitting SRAM 22 BB30 - IA crankset

    The sram manual has got me pulling my hair out. I'm having issues installing my cranks.

    Did everything like stated on the manual, crank doesn't seem to have any play but now this is where the problem comes.

    There's a big gap on the drive side? Without fitting the front or rear mechs. How do i know this is the correct chainline. Is this gap normal on BB30?

    Sram also stress in the manual not use the spacer on drive side
    uploadfromtaptalk1389290197623.jpg

  2. #2
    RoadBikeReview Member
    Reputation: meezo's Avatar
    Join Date
    Jul 2011
    Posts
    31
    bump, help

  3. #3
    Lost in Space...
    Reputation: headloss's Avatar
    Join Date
    Mar 2013
    Posts
    3,432
    Is it without a doubt the BB30 model of the crank? The Quarq version, for example, is wider.

    What is the spacer for, according to the directions? Is there a spacer in the box that you aren't using?

    Re: chainline, do you have adequate clearance between the small ring and the chainstay?

    What frame is this?
    Last edited by headloss; 01-10-2014 at 05:55 AM.

  4. #4
    RoadBikeReview Member
    Reputation: meezo's Avatar
    Join Date
    Jul 2011
    Posts
    31
    Managed to sort it out. Used the spacer.

    Yes this is the newer BB30 apparently where the spindle length is longer. I checked the web and all i could find was that its used on MTB and on the quarq cranks.

    The frame is an openmould fm098.
    I've completed thr build last seems all the gears are silky smooth. Now just for the road test

  5. #5
    RoadBikeReview Member
    Reputation: lumanz's Avatar
    Join Date
    Jan 2014
    Posts
    1

    回复: Fitting SRAM 22 BB30 - IA crankset

    Quote Originally Posted by meezo View Post
    Managed to sort it out. Used the spacer.

    Yes this is the newer BB30 apparently where the spindle length is longer. I checked the web and all i could find was that its used on MTB and on the quarq cranks.

    The frame is an openmould fm098.
    I've completed thr build last seems all the gears are silky smooth. Now just for the road test
    I'm having the same issue here when I try to install force22 on my caad10. So I have questions hope you can help.
    My bb30 shell is 68mm wide, what about yours?
    What spacer do you use? Are they two 2.5mm ones on each side?
    How is this working? I assume you have done the road test.

    Thank you very much! Looking forward to your reply.

Similar Threads

  1. Replies: 15
    Last Post: 12-10-2013, 09:13 PM
  2. ANY BB30 crankset compatible with ANY BB30 bottom bracket?
    By Max802 in forum Components, Wrenching
    Replies: 6
    Last Post: 08-26-2013, 05:56 PM
  3. Fitting a Campag crankset to a BB30 - What works best.
    By cooldollar in forum Cannondale
    Replies: 2
    Last Post: 09-09-2012, 02:26 PM
  4. Sram Force BB30 crankset
    By BeepBeepZipTang in forum SRAM
    Replies: 10
    Last Post: 03-19-2012, 09:29 PM
  5. PAID Spam: SRAM Force Carbon Crankset BB30 53/39 172.5mm
    By cru_jones in forum Components, Wrenching
    Replies: 0
    Last Post: 11-06-2011, 06:58 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

THE SITE

ABOUT ROADBIKEREVIEW

VISIT US AT

© Copyright 2020 VerticalScope Inc. All rights reserved.